Skip to content

Specification

as recorded from the nameplate

Condition
Used What our grades mean
Type
Fourdrinier paper machine, complete line
Trim
156 in (3.92 m)
Rated speed
2,200 FPM
Basis weight range
50-235 GSM (last ran 50-250 GSM)
Headbox
MacFab stainless steel air-pad headbox, installed 2013, with Honeywell ProFlow II dilution (57 actuators, about 3 in zones)
Forming section
Cantilevered stainless Fourdrinier table with 11 suction boxes and a dandy roll
Couch
Suction couch, 36 in O.D., 180 in drilled face, 192 in 1-N bronze shell, hydraulic deckles 156-180 in
1st press
Hewitt suction press
2nd press
Plain press with a blind-drilled nip roll
Dryers
38 dryers, 183.5 in face x 60 in diameter, 100 psi. Nameplate on dryer 1: Allis-Chalmers, 1958, 100 psi at 450 F
Size press
Flooded-nip size press, 182 in
Calender
Escher Wyss Manchester two-roll, serial J-1170, 174 in face, 800 PLI max
Scanner
Honeywell Model 4000 gauging system
Turn-up
Air turn-up system
Reel
Voith horizontal track reel, 174 in wide, surface wind
Winder
Jagenberg Vari-Step 65 two-drum slitter rewinder, serial 30-23922, built 1987, two 250 HP main motors
Drives
Allen-Bradley sectional drives and controls, updated 2008, described as dual 50/60 Hz. PowerFlex 700L liquid-cooled AC drives are documented
Fan pump
Fan pump with 700 HP motor
Electrical (calender, as specified)
Motors 460 V, 3 phase, 60 Hz; controls 115 V, 1 phase, 60 Hz
Hand of machine
Left to right as viewed from the tending side
Quantity available
1 complete line
Listed

Request a quote

Request a quote for this unit

Tell us the quantity and when you need it. You get a written quote with price, availability and freight to your dock, ready for your PO, within 24–48 hours.

A phone photo of the nameplate answers most questions. Email it to sales@dwpindustrial.io with your quote ID, or text it to (612) 449-0646.

Prefer to talk? Call (612) 449-0646

Details

Product Description

Used 156 inch (3.92 m) trim Fourdrinier paper machine, rated 2,200 FPM, offered as a complete line. The wet end has a 2013 MacFab stainless steel air-pad headbox with a Honeywell ProFlow II dilution system, a cantilevered stainless Fourdrinier table, and a bronze suction couch. Downstream sections include a two-press arrangement, 38 dryers rated 100 psi, a flooded-nip size press, a Manchester two-roll calender, a Honeywell Model 4000 scanner, a Voith horizontal track reel, and a Jagenberg Vari-Step 65 winder. Sectional drives and controls were updated in 2008 with Allen-Bradley equipment described as dual 50/60 Hz. The listed basis-weight range is 50-235 GSM, and the machine last ran 50-250 GSM.

Key Specifications

Specification Detail
Type Fourdrinier paper machine, complete line
Trim 156 in (3.92 m)
Rated Speed 2,200 FPM
Basis Weight Range 50-235 GSM (last ran 50-250 GSM)
Headbox MacFab stainless steel air-pad headbox, installed 2013, with Honeywell ProFlow II dilution (57 actuators, about 3 in zones)
Forming Section Cantilevered stainless Fourdrinier table with 11 suction boxes and a dandy roll
Couch Suction couch, 36 in O.D., 180 in drilled face, 192 in 1-N bronze shell, hydraulic deckles 156-180 in
1st Press Hewitt suction press
2nd Press Plain press with a blind-drilled nip roll
Dryers 38 dryers, 183.5 in face x 60 in diameter, 100 psi. Nameplate on dryer 1: Allis-Chalmers, 1958, 100 psi at 450 F
Size Press Flooded-nip size press, 182 in
Calender Escher Wyss Manchester two-roll, serial J-1170, 174 in face, 800 PLI max
Scanner Honeywell Model 4000 gauging system
Turn-up Air turn-up system
Reel Voith horizontal track reel, 174 in wide, surface wind
Winder Jagenberg Vari-Step 65 two-drum slitter rewinder, serial 30-23922, built 1987, two 250 HP main motors
Drives Allen-Bradley sectional drives and controls, updated 2008, described as dual 50/60 Hz. PowerFlex 700L liquid-cooled AC drives are documented
Fan Pump Fan pump with 700 HP motor
Electrical (calender, as specified) Motors 460 V, 3 phase, 60 Hz; controls 115 V, 1 phase, 60 Hz
Hand of Machine Left to right as viewed from the tending side
Condition Used, sold as-is
Quantity Available 1 complete line

Specifications are taken from nameplates, builder sheets, and available records for this machine. Where a record conflicts with a short listing summary, the source sheet is used and the difference is noted below. Contact us to confirm fitment for your grades and mill before you commit.

Capacity and Grades

The listed operating range is 50-235 GSM. Records state the machine last ran 50-250 GSM. Design speed of the paper machine is listed at 2,200 FPM, with a 156 in (3.92 m) trim. The Manchester calender specification sheet rates that stack at 2,700 FPM and 800 PLI maximum, which is a builder rating for the calender, not a change to the machine's listed 2,200 FPM speed.

Headbox

The current headbox is a MacFab stainless steel air-pad unit, installed in 2013, with a Honeywell ProFlow II automatic profile and dilution system. Honeywell's commissioning record for that upgrade describes 57 ProFlow actuators on about 3 inch zones, installed in mid-May 2013. The same builder is also styled MECFAB or MEC-FAB in some records. An earlier headbox on this machine was replaced; do not treat older Voith headbox manual pages that may appear in the file set as a description of the 2013 MacFab box.

Forming Table and Couch

The forming section is a cantilevered stainless steel Fourdrinier table with 11 suction boxes and a dandy roll. The suction couch specification sheet describes a 36 in outside-diameter bronze couch (1-N bronze shell), 180 in drilled face, 192 in shell length, about 1 3/4 in shell thickness, and a total weight of about 18,000 lb. Deckles are hydraulic, with a maximum deckled face of 180 in and a minimum of 156 in. Vacuum is listed at 18 in Hg, with a capacity range of 6,000 to 9,000 CFM, front connection, a carbon-steel welded suction box with a 10 in opening, polyethylene water-lubricated seal strips, a cleaning shower at 85 GPM and 40 psi, and an existing saveall pan. Rotation is clockwise as viewed from the front. The sheet lists LG serial SR-277 and shop order 45030. A short listing summary has described the couch face as 194 in; the specification sheet figures above are used here.

Press Section

The first press is a Hewitt suction press. The second press is a plain press with a blind-drilled nip roll. Confirm felt runs, roll covers, and loadings during inspection.

Dryer Section

The dryer section has 38 dryers, each 183.5 in face by 60 in diameter, rated 100 psi. The nameplate recorded for dryer can 1 is Allis-Chalmers, year built 1958, MAWP 100 psi at 450 F, serial 09504-10, National Board 904. In 2017, dryer cans 1 through 18 were given a nondestructive examination that included ultrasonic shell-thickness testing, which noted no areas of concern on thickness, plus visual and magnetic-particle work. Visual findings were recorded on some of those cans. The 2017 records can be reviewed at inspection. Kadant Johnson steam-system documentation from 2008 is also in the file set for this machine.

Size Press

A flooded-nip size press, 182 in, is included. Confirm roll condition, loading, and whether the size-press run is presently dressed, during inspection.

Calender

The calender is an Escher Wyss Manchester two-roll stack, serial J-1170, 174 in face. The builder specification sheet rates it at 800 PLI maximum (a short listing summary has said 900 PLI; 800 PLI max from the sheet is used here) and 2,700 FPM. Hand of machine is left to right as viewed from the tending side. The top roll is a Farrel Tri-Pass, serial ARH-260-1, 28 in diameter, 174 in face, 207 in bearing centers, SKF 23164 CAK bearings, about 30,000 lb without bearings, no initial crown. The bottom roll is a Farrel NIPCO KL 5-zone variable-crown roll, 22 in diameter, 174 in face, Farrel drawing DNPD-00029, revision A. Motors are specified at 460 V, 3 phase, 60 Hz, with 115 V, 1 phase, 60 Hz controls.

Scanner and Steam Shower

A Honeywell Model 4000 gauging system scanner is included. A Honeywell Devronizer steam shower is documented on this machine, with a 2015 service record. That report describes the unit being taken off the machine for cleaning at the time. Confirm whether the Devronizer is installed today and its present condition during inspection.

Reel

The reel is a Voith horizontal track reel, 174 in wide, surface-wind type, built to produce level parent rolls. Documented features include a rubber-tire spool starter that brings an empty spool up to machine speed in the primary arms, a secondary arm brake, an intermediate stop and eject station, and a parent roll brake. An air turn-up system is included.

Winder

The winder is a Jagenberg Vari-Step 65 two-drum slitter rewinder, serial 30-23922, built in 1987, with two 250 HP main motors. Confirm knife equipment, drum condition, and controls during inspection.

Drives and Controls

Drives and controls were updated in 2008 with a new Allen-Bradley sectional drive system, described as dual 50/60 Hz. The documentation package includes a Rockwell Allen-Bradley PowerFlex 700L liquid-cooled adjustable-frequency AC drive manual, and the drive room photographs show a Rockwell Automation lineup. Confirm the installed drive count, motor list, and the 50/60 Hz capability against your supply during inspection.

Approach Flow, Fan Pump, and Utilities

A fan pump with a 700 HP motor is included. Photographs of the basement utilities show a couch main vacuum pump and a uhle-box and blow-box vacuum pump. The documentation package also includes a Black Clawson Selectifier pressure-screen manual; treat that as a document in the file set and confirm whether a Selectifier, and at what size, is part of the installed approach-flow system. A 2017 quotation for a ProJet dryer-fabric cleaner is likewise in the file set. Confirm whether a fabric cleaner of that type was installed.

Spares and Documentation

Spare associated rolls are included, and complete engineering and documentation for the line can be reviewed. The file set includes builder sheets, drive and steam-system manuals, the 2013 headbox and ProFlow commissioning record, and the 2017 dryer examination. We do not post the raw files with the listing. We can arrange a review for serious inquiries.

What’s Included

This is offered as a complete used paper machine line, as shown in the photographs and described above: approach and fan pump as installed, MacFab headbox with Honeywell ProFlow II, Fourdrinier table and couch, press section, dryer section, size press, calender, scanner, reel and air turn-up, Jagenberg winder, Allen-Bradley sectional drives, associated vacuum pumps, spare associated rolls, and the available engineering and documentation. Sold as-is. Confirm the exact bill of included equipment, including any stock-prep items still with the line, during inspection.

Buying Notes

  • Sold as-is, as a complete line.
  • Inspection by arrangement.
  • Rigging, dismantling, and freight are quoted by item and destination.
  • Used pricing is typically well below new, with a much shorter path than buying and building a new machine of this trim.
  • Hours, wear, roll covers, fabrics, and what is still installed should be confirmed on site before you commit.

Frequently Asked Questions

What trim, speed, and basis-weight range does this machine have?

Trim is 156 in (3.92 m). Rated speed is 2,200 FPM. The listed basis-weight range is 50-235 GSM, and the machine last ran 50-250 GSM.

Who built the headbox, and when was it installed?

The current headbox is a MacFab stainless steel air-pad unit, installed in 2013, with a Honeywell ProFlow II dilution system (57 actuators, about 3 in zones). MacFab is the same Canadian builder also referred to as MECFAB in some records.

What drives are on the machine?

Sectional drives and controls were updated in 2008 with Allen-Bradley equipment, described as dual 50/60 Hz. PowerFlex 700L liquid-cooled AC drives are documented. The fan pump has a 700 HP motor, and the Jagenberg winder has two 250 HP main motors.

Is the winder included?

Yes. A Jagenberg Vari-Step 65 two-drum slitter rewinder, serial 30-23922, built in 1987, with two 250 HP main motors, is part of the line.

Can the machine be inspected?

Yes. Inspection is by arrangement. Dryer examination records from 2017 and the rest of the documentation can be reviewed as part of that process.

How is the machine sold, and who handles removal?

It is sold as-is as a complete line. Rigging, dismantling, and freight are quoted. We are not an authorized distributor, so the original manufacturers' warranties do not apply.

We are not an authorized distributor, so the manufacturer's warranty does not apply to this unit.

DWP Industrial Sales - Done With Pride.
Freight quoted by item & destination.
sales@dwpindustrial.io • (612) 449-0646

Condition and guarantee

We are not an authorized distributor, so the manufacturer's warranty does not apply to this unit. We inspect it, check the nameplate against the listing and photograph the actual unit. If it does not match the description, send it back within 30 days for a full refund. Not sure it fits? Ask us and we will confirm before you order.