Used Beloit 118 in (3.0 m) Trim Fourdrinier Paper Machine, 1,000 FPM
Used Beloit 118 in (3.0 m) Trim Fourdrinier Paper Machine, 1,000 FPMIn stock · 1
- LTL freight quoted by destination
- PO and tax-exempt orders accepted
- 30-day returns
- Same-day processing
- Questions on fit or specs: (612) 449-0646
Specification
as recorded from the nameplate
- Condition
- Used What our grades mean
- Type
- Beloit fourdrinier paper machine, complete line
- Trim
- 118 in (3.0 m)
- Listed speed
- 1,000 FPM (some wet-end and calender components are documented to 1,500 FPM)
- Basis weight, last run
- 60-260 GSM, liner, medium, and white paper. Last ran March 2021
- Earlier design grades
- Bond, cover, offset, and fine paper, about 40-150 lb / 3,300 sq ft in 1993 wet-end design data
- Headbox
- Mec-Fab MF-1003 air-pad headbox, built 1993, about 130 in slice / 129 in deckle (pondsides), with 22 automatic profile adjustments
- Forming section
- Mec-Fab cantilevered fourdrinier, built 1993, 10 suction boxes, foils, wire tension system, wire showers and trim showers. Design data: 134 in wire, 440 in breast-roll to couch-roll centers, 156 in fourdrinier frame centers
- Couch
- LG Industries suction couch, 29.7 in diameter
- Press
- Dual-nip, 3-roll combination press
- Dryers
- 28 dryers, 132 in face x 48 in diameter, rated 150 psi
- Size press
- Beloit 2-roll vertical size press
- Calender
- Manchester 2-roll calender, high-PLI stack, with spare rolls. Bottom roll documented as a Farrel XL-type roll, 18 in diameter x 128 in face, 800 PLI maximum, 70 PLI minimum, design speed 1,500 FPM, with a hydraulic/pneumatic load-sensing control system
- Scanner
- Measurex Model 2090 UltraTech gauging system, with Honeywell 4G high-speed cameras
- Turn-up
- Sandar Industries Model TUSAI-E turn-up system
- Reel
- Manchester horizontal track reel with primary and secondary arms
- Winder
- Langston Speedmaster Model 304 two-drum slitter rewinder, rated 4,000 FPM, rebuilt in 2002 by Associated Machine Design for shaftless operation
- Drives and controls
- Allen-Bradley controls. A documented drive motor is an Allen-Bradley Bulletin 1329L 100 HP inverter-duty motor, 460 V, 3 phase
- Vacuum
- Nash vacuum pumps
- Hand of machine
- Right-hand (standing at the wet end and looking toward the dry end, the drives are on the right)
- Spares
- Associated spare rolls
- Documentation
- Complete engineering and documentation can be reviewed at inspection
- Quantity available
- 1 complete line
- Listed
Request a quote
Request a quote for this unit
Tell us the quantity and when you need it. You get a written quote with price, availability and freight to your dock, ready for your PO, within 24–48 hours.
Prefer to talk? Call (612) 449-0646
Details
Product Description
Product Description
Used Beloit 118 inch (3.0 m) trim fourdrinier paper machine, listed at 1,000 FPM, offered as a complete line. The wet end has a 1993 Mec-Fab air-pad headbox with 22 automatic profile adjustments, a Mec-Fab cantilevered fourdrinier table, and an LG suction couch. Downstream sections include a dual-nip combination press, 28 dryers rated 150 psi, a Beloit vertical size press, a Manchester two-roll calender, a Measurex 2090 scanner, a Manchester horizontal track reel, and a Langston Speedmaster winder rebuilt in 2002. Allen-Bradley controls and Nash vacuum pumps are included. The machine last ran liner, medium, and white paper at 60-260 GSM, in March 2021.
Key Specifications
| Specification | Detail |
|---|---|
| Type | Beloit fourdrinier paper machine, complete line |
| Trim | 118 in (3.0 m) |
| Listed Speed | 1,000 FPM (some wet-end and calender components are documented to 1,500 FPM) |
| Basis Weight, last run | 60-260 GSM, liner, medium, and white paper. Last ran March 2021 |
| Earlier design grades | Bond, cover, offset, and fine paper, about 40-150 lb / 3,300 sq ft in 1993 wet-end design data |
| Headbox | Mec-Fab MF-1003 air-pad headbox, built 1993, about 130 in slice / 129 in deckle (pondsides), with 22 automatic profile adjustments |
| Forming Section | Mec-Fab cantilevered fourdrinier, built 1993, 10 suction boxes, foils, wire tension system, wire showers and trim showers. Design data: 134 in wire, 440 in breast-roll to couch-roll centers, 156 in fourdrinier frame centers |
| Couch | LG Industries suction couch, 29.7 in diameter |
| Press | Dual-nip, 3-roll combination press |
| Dryers | 28 dryers, 132 in face x 48 in diameter, rated 150 psi |
| Size Press | Beloit 2-roll vertical size press |
| Calender | Manchester 2-roll calender, high-PLI stack, with spare rolls. Bottom roll documented as a Farrel XL-type roll, 18 in diameter x 128 in face, 800 PLI maximum, 70 PLI minimum, design speed 1,500 FPM, with a hydraulic/pneumatic load-sensing control system |
| Scanner | Measurex Model 2090 UltraTech gauging system, with Honeywell 4G high-speed cameras |
| Turn-up | Sandar Industries Model TUSAI-E turn-up system |
| Reel | Manchester horizontal track reel with primary and secondary arms |
| Winder | Langston Speedmaster Model 304 two-drum slitter rewinder, rated 4,000 FPM, rebuilt in 2002 by Associated Machine Design for shaftless operation |
| Drives and Controls | Allen-Bradley controls. A documented drive motor is an Allen-Bradley Bulletin 1329L 100 HP inverter-duty motor, 460 V, 3 phase |
| Vacuum | Nash vacuum pumps |
| Hand of Machine | Right-hand (standing at the wet end and looking toward the dry end, the drives are on the right) |
| Spares | Associated spare rolls |
| Documentation | Complete engineering and documentation can be reviewed at inspection |
| Condition | Used, sold as-is |
| Quantity Available | 1 complete line |
Specifications are taken from nameplates, builder sheets, and available records for this machine. Where a record conflicts with a short listing summary, the source sheet is used and the difference is noted below. Contact us to confirm fitment for your grades and mill before you commit.
Capacity and Grades
The machine is listed at 118 in (3.0 m) trim and 1,000 FPM. It last ran liner, medium, and white paper at 60-260 GSM, and it last ran in March 2021.
1993 wet-end design data describe earlier use on bond, cover, offset, and fine paper, at about 40-150 lb per 3,300 sq ft, with a documented production figure of 120 tons per day on fine paper. A Valmet shake design sheet from that period also lists a 350 FPM figure. Treat that as period design data for the wet-end work, not a change to the listed 1,000 FPM operating speed. Several components, including the wire guide, headbox, and the Farrel XL calender roll, are documented to 1,500 FPM.
Headbox
The headbox is a Mec-Fab (also styled MEC-FAB or MecFab) Model MF-1003 air-pad unit, built in 1993, with 22 automatic profile adjustments. Design data list a 129.0 in deckle (pondsides). Short listings have also called this a 130 in slice; both figures are close, and the 129 in pondsides figure comes from the builder sheet.
The MF-1003 is an air-pad box with a tapered header, tube-bank distributor, mixing chamber, throat distributing roll, slice distributing roll, and a fully adjustable slice (rotating beam, upper nozzle blade, and bottom apron blade). Design speeds on the headbox sheet are 350 FPM minimum and 1,500 FPM maximum.
Forming Table and Couch
The forming section is a Mec-Fab cantilevered fourdrinier table, also built in 1993, with 10 suction boxes, foils, a wire tension system, and wire and trim showers. Design data list a 134 in wire width, 440 in from the center of the breast roll to the center of the couch roll, 156 in fourdrinier frame centers, and 48 in from the soleplate to the wire. A 1992 guide-roll data sheet describes a 134 in synthetic wire and a 430-A air guide, with a 9-1/8 in guide roll and a 138 in face.
The couch is an LG Industries suction couch, 29.7 in diameter. Confirm shell condition, deckles, and vacuum connections during inspection.
Press Section
The press is a dual-nip, 3-roll combination press. Confirm felt runs, roll covers, and loadings during inspection.
Dryer Section
The dryer section has 28 dryers, each 132 in face by 48 in diameter, rated 150 psi. Confirm can condition, ropes, doctors, and steam-joint equipment during inspection.
Size Press
A Beloit two-roll vertical size press is included. Confirm roll condition, loading, and whether the size-press run is presently dressed, during inspection.
Calender
The calender is a Manchester two-roll high-PLI stack, with spare rolls. A Farrel specification sheet for the bottom roll of this two-roll calender describes an XL-type roll, 18 in diameter by 128 in face, 139.25 in overall length, 158 in bearing centers, non-driven, Farreloy shell, 11,000 lb, design speed 1,500 FPM, and a design load of 800 PLI maximum and 70 PLI minimum. Control is a hydraulic and pneumatic system with load sensing for the bottom XL roll, and the pump unit is described as one 20 GPM pump and one 18 GPM pump with a 10 HP motor and a 150 gallon tank.
The short listing calls this a high-PLI stack. The 800 PLI maximum comes from the roll sheet. Confirm the installed top-roll details, crowns, and present loading during inspection.
Scanner and Turn-up
A Measurex Model 2090 UltraTech gauging system scanner is included, along with Honeywell 4G high-speed cameras. The turn-up is a Sandar Industries Model TUSAI-E system. Confirm that both are installed and in service during inspection.
Reel
The reel is a Manchester horizontal track reel with primary and secondary arms.
Winder
The winder is a Langston Speedmaster Model 304 two-drum slitter rewinder, rated 4,000 FPM, rebuilt in 2002 by Associated Machine Design. The 2002 rebuild description covers refurbishment of the existing unwind and winder, a new pneumatic brake clutching system, new hydraulic valving, new baseplates, a new lead-in roll designed for 4,000 FPM and dynamically balanced to 4,500 FPM, a new stationary roll barrier, new core chucks for shaftless operation (18 in of manual adjustment), new control panels, and new drive shafts. Confirm knife equipment, drum condition, and controls during inspection.
Drives and Controls
Allen-Bradley controls are included. One documented drive motor is an Allen-Bradley Bulletin 1329L inverter-duty motor, 100 HP, 460 V, 3 phase, with dual continuous ratings of 650 RPM / 124 A at 22.5 Hz and 1,155 RPM / 110 A at 40 Hz, force-ventilated, built 05/2002. Confirm the installed drive count, motor list, and supply voltage during inspection.
Approach Flow, Vacuum, and Utilities
Nash vacuum pumps are included. Records in the file set also describe a three-stage Celleco Cleanpac 350 cleaner system (40 primary, 20 secondary, and 6 tertiary units). Treat that as documentation of the historical approach-flow system and confirm whether those cleaners, and any other stock-prep equipment, are still with the line and included in the sale.
Spares and Documentation
Associated spare rolls are included, and complete engineering and documentation for the line can be reviewed. The file set includes Mec-Fab wet-end drawings and design data, calender roll sheets, and the 2002 winder rebuild description. We do not post the raw files with the listing. We can arrange a review for serious inquiries.
What’s Included
This is offered as a complete used paper machine line, as shown in the photographs and described above: Mec-Fab headbox and fourdrinier table, LG suction couch, combination press, 28 dryers, Beloit size press, Manchester calender, Measurex scanner, Sandar turn-up, Manchester reel, Langston Speedmaster winder, Allen-Bradley controls, Nash vacuum pumps, associated spare rolls, and the available engineering and documentation. Sold as-is. Confirm the exact bill of included equipment, including any stock-prep items still with the line, during inspection.
Buying Notes
Sold as-is, as a complete line. Inspection by arrangement. Rigging, dismantling, and freight are quoted by item and destination. Used pricing is typically well below new, with a much shorter path than buying and building a new machine of this trim. Hours, wear, roll covers, fabrics, and what is still installed should be confirmed on site before you commit.
Frequently Asked Questions
What trim, speed, and grades does this machine have?
Trim is 118 in (3.0 m). The listed speed is 1,000 FPM, with some components documented to 1,500 FPM. It last ran liner, medium, and white paper at 60-260 GSM, in March 2021. Earlier design data describe fine-paper grades in the 40-150 lb range.
Who built the headbox and fourdrinier, and when?
The headbox is a Mec-Fab MF-1003 air-pad unit, and the fourdrinier is a Mec-Fab cantilevered table. Both are documented as 1993. The box has 22 automatic profile adjustments. Mec-Fab is also styled MEC-FAB or MecFab in some records.
Is the winder included?
Yes. A Langston Speedmaster Model 304 slitter rewinder, rated 4,000 FPM and rebuilt in 2002 by Associated Machine Design for shaftless operation, is part of the line.
Can the machine be inspected?
Yes. Inspection is by arrangement. Engineering and documentation can be reviewed as part of that process.
How is the machine sold, and who handles removal?
It is sold as-is as a complete line. Rigging, dismantling, and freight are quoted. We are not an authorized distributor, so the original manufacturers' warranties do not apply.
We are not an authorized distributor, so the manufacturer's warranty does not apply to this unit.
Freight quoted by item & destination.
sales@dwpindustrial.io • (612) 449-0646
Shipping & Handling
Shipping & Handling
$250 flat-rate LTL freight on qualifying orders in the continental US, with overnight, two-day, ground and expedited options available. Hotshot delivery and customer pickup can be arranged.
Orders get same-day processing, Monday–Friday. Transit depends on the carrier and lane.
For international orders or custom shipping needs, please contact us for a quote.
Return Information
Return Information
Return any item within 30 days of delivery.
If the unit is defective or does not match the listing, we pay the return freight and refund or replace it in full. Otherwise the item must be unused and in its original packaging, and you cover the return shipping.
Contact
Contact
Questions on fit, specs, freight or availability? Email sales@dwpindustrial.io or call (612) 449-0646. A person who knows the equipment answers.
Need a different size, voltage or configuration? We source hard-to-find and obsolete equipment through a dealer, factory and surplus network. How sourcing works
Condition and guarantee
We are not an authorized distributor, so the manufacturer's warranty does not apply to this unit. We inspect it, check the nameplate against the listing and photograph the actual unit. If it does not match the description, send it back within 30 days for a full refund. Not sure it fits? Ask us and we will confirm before you order.

