Skip to content

Specification

as recorded from the nameplate

Condition
Used What our grades mean
Manufacturer
Valmet (frames also marked Metso OptiSoft)
Model
OptiSoft tandem calender stack
Type
Soft-nip tandem calender
Year
2000
Serial no.
116
Thermal rolls
762 mm (30 in) diameter, with internal induction heating
Heating
Internal induction heating, 100-250 C (212-480 F)
Polymer rolls
Three Durastar covers, 91 Shore D, and one Durasoft cover, 86 Shore D, each 820 mm (32.3 in) diameter
Guide rolls
318 mm (12.5 in) diameter
Tension rolls
318 mm (12.5 in) diameter
Spreader rolls
267 mm (10.5 in) diameter
Max nip, mechanical
438 kN/m (2,500 PLI)
Max nip, roll cover
350 kN/m (2,000 PLI)
Max operating nip load
2,000 PLI
Web tension
200-1,100 N/m (about 1.1-6.3 PLI). A short listing also states 2.6 PLI, which is about 455 N/m and sits inside that range, but is not a conversion of the full range.
Max speed, mechanical
3,000 m/min (9,843 FPM). A short listing also states 10,170 FPM, which is a slightly high conversion of 3,000 m/min.
Max speed, roll cover
2,500 m/min (8,202 FPM). A short listing also states 8,500 FPM, which is a slightly high conversion of 2,500 m/min.
Drives
100 HP motor on each of the four rolls. Falk gearboxes are visible in the photographs
Doctors
Doctor blades on all rolls
Other
Top and bottom rolls are interchangeable
Face width
Not stated in the available records. The 30 in figure in the title is the thermal-roll diameter. Confirm face width at inspection.
Quantity available
1
Listed

Request a quote

Request a quote for this unit

Tell us the quantity and when you need it. You get a written quote with price, availability and freight to your dock, ready for your PO, within 24–48 hours.

A phone photo of the nameplate answers most questions. Email it to sales@dwpindustrial.io with your quote ID, or text it to (612) 449-0646.

Prefer to talk? Call (612) 449-0646

Details

Product Description

Used Valmet OptiSoft tandem calender stack, built in 2000, serial 116. This is a soft-nip tandem calender with 30 in (762 mm) induction-heated thermal rolls, polymer-covered rolls (Durastar and Durasoft, 820 mm diameter), and a 100 HP motor on each of four rolls. Maximum operating nip load is 2,000 PLI, with a mechanical design of 2,500 PLI. Mechanical speed is listed at 3,000 m/min. The 30 in figure is the thermal-roll diameter; face width is not stated in the available records and should be confirmed at inspection.

Key Specifications

Specification Detail
Manufacturer Valmet (frames also marked Metso OptiSoft)
Model OptiSoft tandem calender stack
Type Soft-nip tandem calender
Year 2000
Serial No. 116
Thermal Rolls 762 mm (30 in) diameter, with internal induction heating
Heating Internal induction heating, 100-250 C (212-480 F)
Polymer Rolls Three Durastar covers, 91 Shore D, and one Durasoft cover, 86 Shore D, each 820 mm (32.3 in) diameter
Guide Rolls 318 mm (12.5 in) diameter
Tension Rolls 318 mm (12.5 in) diameter
Spreader Rolls 267 mm (10.5 in) diameter
Max Nip, Mechanical 438 kN/m (2,500 PLI)
Max Nip, Roll Cover 350 kN/m (2,000 PLI)
Max Operating Nip Load 2,000 PLI
Web Tension 200-1,100 N/m (about 1.1-6.3 PLI). A short listing also states 2.6 PLI, which is about 455 N/m and sits inside that range, but is not a conversion of the full range.
Max Speed, Mechanical 3,000 m/min (9,843 FPM). A short listing also states 10,170 FPM, which is a slightly high conversion of 3,000 m/min.
Max Speed, Roll Cover 2,500 m/min (8,202 FPM). A short listing also states 8,500 FPM, which is a slightly high conversion of 2,500 m/min.
Drives 100 HP motor on each of the four rolls. Falk gearboxes are visible in the photographs
Doctors Doctor blades on all rolls
Other Top and bottom rolls are interchangeable
Face Width Not stated in the available records. The 30 in figure in the title is the thermal-roll diameter. Confirm face width at inspection.
Condition Used, sold as-is
Quantity Available 1

Specifications are taken from nameplates, builder sheets, and available records for this machine. Where a record conflicts with a short listing summary, the source sheet is used and the difference is noted below. Contact us to confirm fitment for your grades and mill before you commit.

What This Machine Is

This is a Valmet OptiSoft tandem soft-nip calender stack, built in 2000, serial 116. Soft-nip calenders run a heated thermal roll against a polymer-covered roll. That wider, more compliant nip is used to develop smoothness and gloss with less bulk loss than a hard-nip stack. A tandem arrangement provides two nips in series. Valmet later grouped the OptiSoft line under OptiCalender Soft. The frames on this unit are marked both Valmet OptiSoft and Metso OptiSoft, a period name for the same builder.

The 30 in figure used in short titles is the thermal-roll diameter, 762 mm, not a documented face or trim width. Face width is not in the records we have. Confirm the face, and the present roll arrangement, during inspection.

Rolls and Covers

Thermal rolls are 762 mm (30 in) diameter. Polymer rolls are listed as three Durastar covers at 91 Shore D and one Durasoft cover at 86 Shore D, each 820 mm (32.3 in) diameter. Guide and tension rolls are 318 mm (12.5 in) diameter, and spreader rolls are 267 mm (10.5 in) diameter.

Four rolls are each driven by a 100 HP motor. Records list four polymer rolls (three Durastar and one Durasoft). Confirm which polymer rolls are installed in the stack, which if any are spares, and the present cover condition during inspection. Top and bottom rolls are interchangeable. Doctor blades are fitted on all rolls.

Nip Load and Speed

Maximum mechanical nip pressure is 438 kN/m (2,500 PLI). The roll-cover limit is 350 kN/m (2,000 PLI), and the maximum operating nip load is listed at 2,000 PLI, which matches the cover limit.

Maximum mechanical speed is listed at 3,000 m/min, which is 9,843 FPM. A short listing also states 10,170 FPM; that figure is a slightly high conversion of 3,000 m/min, so the metric rating is used here. The roll-cover speed limit is 2,500 m/min, which is 8,202 FPM (a short listing states 8,500 FPM). Web tension is listed at 200-1,100 N/m, about 1.1-6.3 PLI. The same short listing also states 2.6 PLI, about 455 N/m, which falls inside that range but is not a conversion of the full range.

Heating and Drives

The thermal rolls have internal induction heating, listed at 100-250 C (212-480 F). Confirm the condition of the heating system, controls, and any profiling equipment during inspection.

Each of the four rolls is driven by a 100 HP motor. Photographs show the drive motors and Falk gearboxes at the roll ends, along with yellow loading or bearing housings. Confirm motor nameplates, gearbox ratios, and the electrical supply during inspection.

Photographs and Related Equipment

The photographs show the roll ends and Valmet OptiSoft cabinet, the drive motors and Falk gearboxes, and the Metso OptiSoft frame with guards. A GL&V-marked unit sits in the foreground of one view. Confirm what that unit is, and whether it is included, during inspection.

Documentation

Complete engineering details are described as available and can be reviewed at inspection. We do not post raw files with the listing. We can arrange a review for serious inquiries.

What’s Included

This is offered as a used Valmet OptiSoft tandem calender stack, as shown in the photographs and described above: the stack with thermal and polymer rolls as installed, guide, tension, and spreader rolls, doctor blades, 100 HP roll drives, induction heating as installed, and the available engineering details. Sold as-is. Confirm the exact bill of included equipment, including spare polymer rolls, the GL&V-marked unit shown in the photographs, and any controls or auxiliaries, during inspection.

Buying Notes

Sold as-is. Inspection by arrangement. Rigging, dismantling, and freight are quoted by item and destination. Used pricing is typically well below new, with a shorter path than buying a new calender of this type. Cover condition, face width, installed roll arrangement, heating, drives, and what is still with the stack should be confirmed on site before you commit.

Frequently Asked Questions

Is the 30 in figure the face width or the roll diameter?

In the specification list, 30 in (762 mm) is the thermal-roll diameter. Face or trim width is not stated in the records we have. Confirm the face at inspection.

What is an OptiSoft tandem calender?

OptiSoft is Valmet's soft-nip calender, later grouped under OptiCalender Soft. A soft nip is a heated thermal roll against a polymer-covered roll. Tandem means two nips in series. This unit was built in 2000, serial 116.

What nip load and speed can it run?

Maximum operating nip load is 2,000 PLI, with a mechanical design of 2,500 PLI. Mechanical speed is listed at 3,000 m/min (9,843 FPM), and the roll-cover speed limit is 2,500 m/min (8,202 FPM).

What rolls and covers are included?

Thermal rolls are 30 in diameter with induction heating. Records list three Durastar polymer rolls at 91 Shore D and one Durasoft at 86 Shore D, each 32.3 in diameter, plus guide, tension, and spreader rolls. Four rolls are each driven by a 100 HP motor. Confirm which covers are installed and which are spares.

Can the machine be inspected, and how is it sold?

Yes. Inspection is by arrangement. It is sold as-is. Rigging, dismantling, and freight are quoted. We are not an authorized distributor, so the original manufacturer's warranty does not apply.

We are not an authorized distributor, so the manufacturer's warranty does not apply to this unit.

DWP Industrial Sales - Done With Pride.
Freight quoted by item & destination.
sales@dwpindustrial.io • (612) 449-0646

Condition and guarantee

We are not an authorized distributor, so the manufacturer's warranty does not apply to this unit. We inspect it, check the nameplate against the listing and photograph the actual unit. If it does not match the description, send it back within 30 days for a full refund. Not sure it fits? Ask us and we will confirm before you order.